Network Connection in United Kingdom
Switch and router bring-up, uplinks, VLANs, cross-connects and connectivity validation with evidence. delivered in United Kingdom by engineers who work to the standards, safety regime and documentation expectations of this market. Mobilisation from London in 6 hours. London's Slough and Docklands clusters plus Manchester and Edinburgh give a mature colocation market. The distinctive constraint is the CDM regime: as soon as work is construction, principal-contractor duties and written method statements apply, and operators audit for them.
- Mobilisation
- 6 hours
- Hubs
- London · Manchester
- Region
- UK & Ireland
- Mains supply
- 230 V single-phase, 400 V three-phase, 50 Hz
- On-site languages
- English
- Local entity
- Field hubs and partners
The United Kingdom market
London's Slough and Docklands clusters plus Manchester and Edinburgh give a mature colocation market. The distinctive constraint is the CDM regime: as soon as work is construction, principal-contractor duties and written method statements apply, and operators audit for them.
We mobilise from London and Manchester with a target of 6 hours to site. London and Manchester hubs give six-hour mobilisation across England and Wales. Change advisory boards usually sit weekly, so submit early.
Our United Kingdom footprint
- London
- Manchester
London hub covering Slough, Docklands, Manchester and Edinburgh. Post-Brexit customs paperwork handled for equipment moves.
All 28 covered countriesLocal delivery
How we deliver network connection here
Interconnection work in United Kingdom is usually cross-connects, meet-me rooms and carrier hand-offs, where the failure mode is not a bad link but a wrong demarcation. We confirm the demarc, the media type and the carrier's own requirements before cutting anything.
- Cross-connect routes confirmed against the facility's meet-me-room records before the cable is pulled
- Media and connector type verified end to end — single-mode vs multimode, and polish type — before the hand-off
- Carrier demarcation documented and photographed so responsibility is unambiguous
- Labelling to the facility's administration scheme, not a private convention
- Link tested and the result attached to the cross-connect record, so a fault later is quick to isolate
Standards and compliance in United Kingdom
Work is signed off against the standards that actually apply here, not the ones our engineers are most familiar with. In United Kingdom that means BS EN 50173 and BS EN 50174 as the primary reference, with iec 61935-1 certification as the test regime.
Site safety runs under CDM Regulations 2015 — principal contractor duties, RAMS, written method statements. We supply certificates before mobilisation rather than on request.
Standards applied on site
- BS EN 50173 and BS EN 50174 for cabling
- BS EN 50600 for facility design and operations
- BS 7671 (IET Wiring Regulations) for electrical installation
- TIA-942 where a US-headquartered customer imposes it
- UK GDPR and the Data Protection Act 2018, supervised by the ICO
- NIS Regulations 2018 for operators of essential services
- FCA operational resilience rules for financial-services tenants
Site access and safety
Photo ID, signed NDA and often a basic DBS check for sites with public-sector tenants. Slough and Docklands facilities typically need 24–48 hours notice for escorted access.
- CDM Regulations 2015 — principal contractor duties, RAMS, written method statements
- CSCS or ECS cards for site personnel
- Permit-to-work and lockout/tagout on live distribution
Related work
Network Connection delivery cases
UK & Ireland · 2023
Two server rooms migrated in one weekend, London
A consolidated move of two legacy server rooms into a colocation suite over a single 54-hour window, with rollback positions agreed before anything was de-racked.
Central & Eastern Europe · 2023
62 edge sites across five countries
A standardised edge build delivered by rotating crews in Poland, Czechia, Germany, Austria and the Netherlands — one method, one documentation set, five countries.
UK & Ireland · 2024
Production fabric bring-up and failover proof, Dublin
Commissioning of a dual-fabric network across two halls, with redundancy proven by deliberate fault injection rather than accepted on the basis of a design document.
Local questions
Working in United Kingdom
Do you produce RAMS for CDM compliance?
Yes. Every UK job ships with risk assessments and a written method statement, and we will work as principal contractor or as a contractor under your principal contractor, whichever the project structure requires.
Are your engineers CSCS or ECS carded?
Engineers working on construction-classified sites hold the appropriate ECS card. We provide card details in advance for site registration.
Can you support FCA operational resilience requirements?
We can supply the change records, test evidence and handover documentation that a financial-services tenant needs for its important business services evidence. We do not provide compliance advice.
Elsewhere
Network Connection in other markets
Same service, different standards. Pick the market you are building in.