Network Connection in France
Switch and router bring-up, uplinks, VLANs, cross-connects and connectivity validation with evidence. delivered in France by engineers who work to the standards, safety regime and documentation expectations of this market. Mobilisation from Paris in 8 hours. Paris is a top-five European interconnection market and Marseille is a major subsea landing point for routes into the Mediterranean, Africa and Asia. French operators expect French-language documentation and are strict about habilitation électrique.
- Mobilisation
- 8 hours
- Hubs
- Paris · Marseille
- Region
- Western Europe
- Mains supply
- 230/400 V, 50 Hz
- On-site languages
- French (native), English
- Local entity
- Field hubs and partners
The France market
Paris is a top-five European interconnection market and Marseille is a major subsea landing point for routes into the Mediterranean, Africa and Asia. French operators expect French-language documentation and are strict about habilitation électrique.
We mobilise from Paris and Marseille with a target of 8 hours to site. Paris and Marseille hubs give eight-hour mobilisation. French sites commonly close works in August — plan major projects around it.
Our France footprint
- Paris
- Marseille
Paris region and Marseille landing stations covered from the Frankfurt and Lisbon hubs.
All 28 covered countriesLocal delivery
How we deliver network connection here
Interconnection work in France is usually cross-connects, meet-me rooms and carrier hand-offs, where the failure mode is not a bad link but a wrong demarcation. We confirm the demarc, the media type and the carrier's own requirements before cutting anything.
- Cross-connect routes confirmed against the facility's meet-me-room records before the cable is pulled
- Media and connector type verified end to end — single-mode vs multimode, and polish type — before the hand-off
- Carrier demarcation documented and photographed so responsibility is unambiguous
- Labelling to the facility's administration scheme, not a private convention
- Link tested and the result attached to the cross-connect record, so a fault later is quick to isolate
Standards and compliance in France
Work is signed off against the standards that actually apply here, not the ones our engineers are most familiar with. In France that means NF EN 50173 and NF EN 50174 as the primary reference, with iec 61935-1 certification as the test regime.
Site safety runs under Habilitation électrique (B1V, B2V, BR, BC). We supply certificates before mobilisation rather than on request.
Standards applied on site
- NF EN 50173 and NF EN 50174 for cabling
- NF EN 50600 for facility design and operations
- NF C 15-100 for low-voltage electrical installation
- EU GDPR supervised by the CNIL
- HDS certification requirements where health data is hosted
- ANSSI guidance and SecNumCloud where the tenant is public sector
- NIS2 through the French implementation
Site access and safety
Plan de prévention must be agreed before intervention on occupied sites. Photo ID and a signed engagement de confidentialité are standard.
- Habilitation électrique (B1V, B2V, BR, BC) matched to the work
- Plan de prévention for contractor intervention on an occupied site
Related work
Network Connection delivery cases
UK & Ireland · 2023
Two server rooms migrated in one weekend, London
A consolidated move of two legacy server rooms into a colocation suite over a single 54-hour window, with rollback positions agreed before anything was de-racked.
Central & Eastern Europe · 2023
62 edge sites across five countries
A standardised edge build delivered by rotating crews in Poland, Czechia, Germany, Austria and the Netherlands — one method, one documentation set, five countries.
UK & Ireland · 2024
Production fabric bring-up and failover proof, Dublin
Commissioning of a dual-fabric network across two halls, with redundancy proven by deliberate fault injection rather than accepted on the basis of a design document.
Local questions
Working in France
Do your engineers hold habilitation électrique?
Yes, matched to the task — B1V or B2V for execution, BR for intervention, BC for consignation. Certificates are supplied before mobilisation.
Is the documentation in French?
Yes. Test results, handover notes and the procès-verbal de réception are produced in French, with an English version on request.
Can you work on HDS-scoped infrastructure?
We work to the handling and traceability controls an HDS-certified host requires, and we can sign the confidentiality and processing agreements. We do not hold HDS certification ourselves and will not imply it.
Elsewhere
Network Connection in other markets
Same service, different standards. Pick the market you are building in.