Network Connection in India
Switch and router bring-up, uplinks, VLANs, cross-connects and connectivity validation with evidence. delivered in India by engineers who work to the standards, safety regime and documentation expectations of this market. Mobilisation from Mumbai in 24 hours. India is adding capacity faster than almost any market, across Mumbai, Delhi NCR, Bengaluru, Chennai and Hyderabad. The practical differentiators are BIS-compliant materials, sector regulators with their own rules, and the sheer scale of campus builds.
- Mobilisation
- 24 hours
- Hubs
- Mumbai · Bengaluru · Chennai · Hyderabad · Delhi NCR
- Region
- Asia-Pacific
- Mains supply
- 230/415 V, 50 Hz
- On-site languages
- English, Hindi
- Local entity
- Field hubs and partners
The India market
India is adding capacity faster than almost any market, across Mumbai, Delhi NCR, Bengaluru, Chennai and Hyderabad. The practical differentiators are BIS-compliant materials, sector regulators with their own rules, and the sheer scale of campus builds.
We mobilise from Mumbai and Bengaluru and Chennai and Hyderabad and Delhi NCR with a target of 24 hours to site. Mumbai, Bengaluru, Chennai, Hyderabad and Delhi NCR hubs give 24-hour mobilisation in those metros. Tier-2 cities are served by scheduled mobilisation.
Our India footprint
- Mumbai
- Bengaluru
- Chennai
- Hyderabad
- Delhi NCR
Mumbai, Bengaluru, Chennai, Hyderabad and Delhi NCR. Local engineering teams for build-outs and field support at scale.
All 28 covered countriesLocal delivery
How we deliver network connection here
Interconnection work in India is usually cross-connects, meet-me rooms and carrier hand-offs, where the failure mode is not a bad link but a wrong demarcation. We confirm the demarc, the media type and the carrier's own requirements before cutting anything.
- Cross-connect routes confirmed against the facility's meet-me-room records before the cable is pulled
- Media and connector type verified end to end — single-mode vs multimode, and polish type — before the hand-off
- Carrier demarcation documented and photographed so responsibility is unambiguous
- Labelling to the facility's administration scheme, not a private convention
- Link tested and the result attached to the cross-connect record, so a fault later is quick to isolate
Standards and compliance in India
Work is signed off against the standards that actually apply here, not the ones our engineers are most familiar with. In India that means IS/ISO/IEC 11801 and IS 16605 as the primary reference, with iec 61935-1 or tia-1152 certification to match the specification as the test regime.
Site safety runs under Factory Act and site-specific permit-to-work regimes. We supply certificates before mobilisation rather than on request.
Standards applied on site
- IS/ISO/IEC 11801 and IS 16605 for cabling, alongside EN or TIA specifications from the client
- TIA-942 tier ratings widely referenced by developers
- IS 732 and NBC 2016 Part 8 for electrical installation
- DPDP Act 2023 and rules for personal data processing
- RBI outsourcing and IT-governance directions for banks and NBFCs
- IRDAI and SEBI guidance for insurance and capital-markets tenants
- MeitY empanelled-auditor requirements for CERT-In directions
Site access and safety
Campus access requires photo ID and advance registration, sometimes with police verification for long-term personnel. Allow 48 hours for first-time access.
- Factory Act and site-specific permit-to-work regimes
- Electrical work by licensed personnel under the state electricity rules
Related work
Network Connection delivery cases
UK & Ireland · 2023
Two server rooms migrated in one weekend, London
A consolidated move of two legacy server rooms into a colocation suite over a single 54-hour window, with rollback positions agreed before anything was de-racked.
Central & Eastern Europe · 2023
62 edge sites across five countries
A standardised edge build delivered by rotating crews in Poland, Czechia, Germany, Austria and the Netherlands — one method, one documentation set, five countries.
UK & Ireland · 2024
Production fabric bring-up and failover proof, Dublin
Commissioning of a dual-fabric network across two halls, with redundancy proven by deliberate fault injection rather than accepted on the basis of a design document.
Local questions
Working in India
Do you use BIS-compliant materials?
Yes. Cables, cords and accessories are BIS-marked where the standard applies, and we supply the conformity documentation with the handover pack.
Can you support RBI or IRDAI-regulated tenants?
We provide the change records, test evidence and asset documentation those regulators expect from a service provider. We do not provide regulatory advice.
How do you handle large campus builds?
With a fixed team and a phased plan, so knowledge stays on site and quality does not drift across phases. We size crews per phase and report daily.
Elsewhere
Network Connection in other markets
Same service, different standards. Pick the market you are building in.