OS & Application Installation in Italy
OS imaging, hypervisor build-out, hardening and application deployment aligned to your platform standard. delivered in Italy by engineers who work to the standards, safety regime and documentation expectations of this market. Mobilisation from Milan in 10 hours. Milan is Italy's interconnection hub and the landing point for several Mediterranean routes. Italian sites are documentation-heavy and the DURC requirement is a hard gate before any contractor sets foot on site.
- Mobilisation
- 10 hours
- Hubs
- Milan
- Region
- Southern Europe
- Mains supply
- 230/400 V, 50 Hz
- On-site languages
- Italian (native), English
- Local entity
- Field hubs and partners
The Italy market
Milan is Italy's interconnection hub and the landing point for several Mediterranean routes. Italian sites are documentation-heavy and the DURC requirement is a hard gate before any contractor sets foot on site.
We mobilise from Milan with a target of 10 hours to site. Milan hub gives ten-hour mobilisation across the north. Central and southern Italy are served by planned mobilisation.
Our Italy footprint
- Milan
Milan corridor covered from Frankfurt; Rome and Palermo on request.
All 28 covered countriesLocal delivery
How we deliver os & application installation here
OS and application build in Italy is run to a written image and a documented baseline, so the ten-thousandth server is identical to the first. Where a customer's own hardening standard applies — and regulated operators in Italy usually have one — we build to it and record the deviations rather than silently resolving them.
- Build to the customer's approved image or a documented baseline agreed at scoping
- Firmware, driver and BIOS/UEFI settings captured and applied consistently, with versions recorded
- Hardening applied to the customer's standard; deviations listed explicitly in the handover
- Network configuration, VLAN membership and routing verified against the design before handover
- Compliance and sector guidance relevant to Italy referenced where the customer requires evidence of it
Standards and compliance in Italy
Work is signed off against the standards that actually apply here, not the ones our engineers are most familiar with. In Italy that means CEI EN 50173 and CEI EN 50174 as the primary reference, with iec 61935-1 certification as the test regime.
Site safety runs under D.Lgs 81/2008 — DUVRI and PSC where construction-classified work applies. We supply certificates before mobilisation rather than on request.
Standards applied on site
- CEI EN 50173 and CEI EN 50174 for cabling
- CEI EN 50600 for facility design and operations
- CEI 64-8 for low-voltage electrical installation
- EU GDPR supervised by the Garante per la protezione dei dati personali
- Perimetro di sicurezza nazionale cibernetica for strategic operators
- AGID requirements for public-sector and cloud tenants
Site access and safety
DURC (regolarità contributiva) must be valid and exchanged before site entry, along with the DUVRI. This is non-negotiable on Italian sites and takes time on first engagement.
- D.Lgs 81/2008 — DUVRI and PSC where construction-classified work applies
- PES/PAV electrical competence qualifications under CEI 11-27
Related work
OS & Application Installation delivery cases
Local questions
Working in Italy
Do you provide DURC and DUVRI documentation?
We provide the contribution-regularity documentation and cooperate fully on the DUVRI. For non-Italian entities the paperwork differs, so we are explicit about which route applies before you commit.
Are your engineers qualified under CEI 11-27?
Electrical competence is held at PES or PAV level as the work requires, and certificates are supplied before mobilisation.
Is documentation delivered in Italian?
Yes — test results, handover and the verbale di collaudo are produced in Italian, with English on request.
Elsewhere
OS & Application Installation in other markets
Same service, different standards. Pick the market you are building in.